Mulch Calculator
Mulch keeps soil moist, holds weeds down and makes a bed look finished — but ordering the wrong amount means a half-empty bed or a pile left on the driveway. This calculator turns your bed size and depth into cubic feet, cubic yards, bag count and estimated weight, so you order exactly what you need.
Enter your bed size and depth, pick your mulch type and bag size — the volume, bags and weight update live.
Mulch You Need
How It Works
Mulch is sold by volume, and the maths is area × depth. The calculator converts the depth from inches to feet (divide by 12), multiplies by the bed area in square feet to get cubic feet, then divides by 27 — the number of cubic feet in a cubic yard — because bulk mulch is ordered by the cubic yard. Bag counts divide the cubic feet by the bag size and round up, since you cannot buy part of a bag. Weight multiplies the cubic yards by the density of the mulch type you picked.
The coverage rule falls out of the same maths: one cubic yard is 27 cubic feet, and at 3 inches deep (a quarter of a foot) it spreads over 27 ÷ 0.25 = 108 square feet. At 2 inches deep it covers 27 ÷ (2/12) = 162 square feet. That gives you a quick sanity check before you order — if your bed is about 100 sq ft and you want 3 inches, expect to need about one cubic yard.
Worked Examples
100 sq ft bed, 3 inches deep, shredded hardwood, 2 cu ft bags: the depth is 3 ÷ 12 = 0.25 ft, so the volume is 100 × 0.25 = 25.00 cubic feet, or 25 ÷ 27 = 0.93 cubic yards. Bags: 25 ÷ 2 = 12.5, rounded up to 13 bags. Weight: 0.93 × 600 ≈ 556 lb.
500 sq ft bed, 2 inches deep: the volume is 500 × (2 ÷ 12) = 83.33 cubic feet, or 3.09 cubic yards. Bags: 83.33 ÷ 2 = 41.67, rounded up to 42 bags of 2 cu ft.
Assumptions
- The bed is flat with an even depth throughout. Slopes, dips and the space taken up by plants change the true volume slightly.
- Densities are dry planning figures — shredded hardwood 600, pine bark 450, cedar 550, rubber 1,200 lb per cubic yard. Actual weight varies by supplier, piece size and moisture; wet mulch can weigh 50% or more than dry mulch.
- Bag counts always round up. A result of 12.5 bags means 13 bags — the extra half bag covers the shortfall, and a little spare mulch is useful for topping up later.
- One cubic yard equals 27 cubic feet — that is 13.5 two-cubic-foot bags, so a full cubic yard in 2 cu ft bags means buying 14 bags.
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Enter the bed size and depth, pick your mulch type and bag size. The volume, bags and weight update live as you type.
- Enter the bed size — length and width in feet, or the area in square feet if you have already measured it.
- Set the depth in inches — 3 inches is the usual choice for garden beds.
- Pick the mulch type and bag size, then read the cubic yards in the headline and the bags and weight in the table.
The Reset button restores the worked example (100 sq ft at 3 inches: 0.93 cubic yards, 13 bags, about 556 lb of shredded hardwood).
Tips and Practical Advice
- For anything over about a cubic yard, bulk delivery is usually far cheaper per yard than bags — and you skip opening dozens of bags.
- Keep mulch a few inches away from plant stems and tree trunks. Mulch piled against bark holds moisture there and invites rot.
- Measure the settled depth, not the loose depth. Freshly spread mulch settles, so a bed that starts at 4 inches loose ends up nearer 3 inches.
- For a path or patio base instead, use the Gravel Calculator — it works the same way, with gravel densities and bag sizes.
Frequently Asked Questions
How many cubic yards of mulch do I need?
Multiply the bed area in square feet by the depth in feet (inches divided by 12) to get cubic feet, then divide by 27. A 100 sq ft bed at 3 inches deep is 25 cubic feet, or 0.93 cubic yards.
How many bags of mulch make a cubic yard?
A cubic yard holds 27 cubic feet, so it takes 13.5 two-cubic-foot bags to make one cubic yard — buy 14, since you cannot buy half a bag. In 3-cubic-foot bags, one cubic yard is exactly 9 bags.
How much does a cubic yard of mulch weigh?
Dry mulch weighs about 600 lb per cubic yard for shredded hardwood, 450 lb for pine bark, 550 lb for cedar and 1,200 lb for rubber. Wet mulch can weigh 50% or more than dry mulch, so a rain-soaked load will be heavier.
How deep should mulch be in a garden bed?
Two to three inches is the usual depth: enough to hold moisture in and weeds down, without smothering the soil. At 3 inches deep, one cubic yard covers about 108 square feet; at 2 inches it covers about 162 square feet.
Last updated: