Gravel Calculator
Laying a driveway, path or patio base? Enter the area and depth to find out how many cubic yards of gravel you need — and what that weighs in tons and bags.
Gravel You Need
How It Works
Gravel is sold by volume, and the maths is length × width × depth. The calculator converts the depth from inches to feet, multiplies the three dimensions to get cubic feet, then divides by 27 — the number of cubic feet in a cubic yard — because bulk gravel is ordered by the cubic yard. To get the weight, it multiplies the cubic yards by the density of the material you picked, in short tons per cubic yard. For bagged gravel it divides the cubic feet by 0.5, the size of a standard bag, and rounds up, since you cannot buy part of a bag.
The waste allowance is applied on top of the exact volume: a 10% allowance means you order 1.10 times the exact volume. That covers uneven ground, compaction underfoot and the odd spilled wheelbarrow. Bag counts are shown both for the exact volume and for the volume including waste, so you can see both numbers before you buy.
Worked Example
A 10 ft × 20 ft area, 4 inches deep, filled with crushed stone #57: the area is 200 sq ft and the depth is 4 ÷ 12 = 0.333 ft, so the volume is 200 × 0.333 = 66.67 cubic feet, or 66.67 ÷ 27 = 2.47 cubic yards. At 1.40 tons per cubic yard that is 3.46 tons. With a 10% waste allowance: 2.47 × 1.10 = 2.72 cubic yards and 3.80 tons. In bags: 66.67 ÷ 0.5 = 133.33, so 134 half-cubic-foot bags for the exact volume.
Assumptions
- The area is flat with an even depth throughout — slopes and dips use more gravel.
- Densities are typical averages: pea gravel 1.35, crushed stone #57 1.40, crusher run / road base 1.45, river rock 1.50 short tons per cubic yard. Actual density varies by supplier, stone size and moisture.
- Bags are 0.5 cubic feet each; check the size printed on the bag you buy.
- The waste allowance defaults to 10% and applies to the volume, weight and the second bag count.
Crushed stone #57 for a 10 ft × 20 ft area at different depths:
| Depth | Cubic feet | Cubic yards | Tons | 0.5 cu ft bags |
|---|---|---|---|---|
| 2 inches | 33.33 | 1.23 | 1.73 | 67 |
| 4 inches | 66.67 | 2.47 | 3.46 | 134 |
| 6 inches | 100.00 | 3.70 | 5.19 | 200 |
How to Use This Calculator
Enter the length and width in feet and the depth in inches, pick your material, and set the waste allowance. Results update live, showing cubic feet, cubic yards, tons, pounds and bag counts. For an irregular shape, split it into rectangles, run each one separately, and add the volumes.
Tips and Practical Advice
Measure the depth after compaction, not the loose depth — gravel settles by roughly a fifth once it is raked and driven over, so a 4-inch finished layer starts out closer to 5 inches loose. For anything over about a cubic yard, bulk delivery by truck is usually far cheaper per yard than bags. And check the supplier's minimum order and delivery fee: a small top-up order can cost more in delivery than in gravel. For planting beds rather than paths and driveways, mulch does the same ground-covering job and breaks down into the soil — a mulch calculator works out how many bags you need.
Sources: Densities are typical published averages for each material (pea gravel 1.35, crushed stone #57 1.40, crusher run 1.45, river rock 1.50 short tons per cubic yard); actual density varies by supplier, stone size and moisture. Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
Frequently Asked Questions
How many cubic yards of gravel do I need?
Multiply length × width × depth, with the depth converted from inches to feet by dividing by 12, to get cubic feet — then divide by 27, the number of cubic feet in a cubic yard. A 10 ft × 20 ft area at 4 inches deep is 66.67 cubic feet, or 2.47 cubic yards. The same maths covers the gravel base under a deck — a deck calculator sizes the boards and joists that go on top.
How many tons is a cubic yard of gravel?
It depends on the material: pea gravel averages about 1.35 short tons per cubic yard, crushed stone #57 about 1.40, crusher run about 1.45 and river rock about 1.50. Density varies by supplier, stone size and moisture, so confirm the figure with your supplier before ordering by weight.
How many bags of gravel make a cubic yard?
A cubic yard holds 27 cubic feet, so it takes 54 half-cubic-foot bags to make one cubic yard. The 10 ft × 20 ft example at 4 inches deep needs 134 bags for the exact volume. For larger jobs, bulk delivery is usually far cheaper per yard than bags.
How deep should gravel be for a driveway?
Four inches of compacted gravel over a prepared, levelled base is typical for a residential driveway; heavy vehicles or soft ground may need six inches. Measure the compacted depth, not the loose depth — gravel settles by roughly a fifth once it is raked and driven over.
Last updated: