331+ free tools. No sign-up. No hidden fees. Explore the toolkit

Square Footage Calculator

Square footage is the area of a floor or surface, measured in square feet. For a rectangle it is simply length × width: a room 12 feet long and 15 feet wide is 180 square feet. Measure any room — rectangle, L-shape, circle or triangle — add rooms together, and work out how much material to order with waste included.

Add rooms one by one, convert the total to square metres, and add a waste allowance for flooring, paint and tile.

Optional — used to label the room in the list below.

An L-shaped room is measured as two rectangles added together.

RoomShapeDimensionsArea (sq ft)Remove

Extra material for cuts and offcuts. 10% is standard for flooring; use 15% for diagonal layouts.

Total Area

Save to Pinterest
Disclaimer: Results are estimates based on the dimensions you enter. Measure at the longest points, round up when ordering, and check the manufacturer's coverage rates for the material you are buying.

How It Works

Square footage is the area of a floor or surface, measured in square feet. For a rectangle it is simply length × width: a room 12 feet long and 15 feet wide is 180 square feet. A triangle is base × height ÷ 2, and a circle is π × (diameter ÷ 2)2 — a round room 10 feet across is about 78.54 square feet. An L-shaped room has no single formula, so it is measured as two rectangles added together: split the L into its two arms, work out each rectangle's area, and add them.

Most jobs need more than one room, so the calculator keeps a running list: add each room with its own shape and dimensions, and the total updates with every room, along with the total in square metres (1 square foot = 0.092903 square metres). The waste allowance then covers the material lost to cuts, offcuts and mistakes: the material estimate is the total area plus the waste percentage. The table below shows the most common shapes at a glance:

ShapeExampleArea
Rectangle12 ft × 15 ft180.00 sq ft
L-shape10 ft × 12 ft plus 6 ft × 8 ft168.00 sq ft
Circle10 ft diameter78.54 sq ft
Triangle10 ft base, 8 ft height40.00 sq ft

Waste is where flooring estimates usually go wrong. Ordering exactly the room's area leaves nothing for the cuts along the edges, and a shortfall means a second order — often from a different dye lot or batch. The usual allowances are 5% for a simple rectangular room, 10% for a standard layout, and 15% for a diagonal layout or a room with many corners. On a 180 sq ft room that means 189 sq ft at 5%, 198 sq ft at 10% and 207 sq ft at 15%. Once you have the area plus waste, a hardwood flooring cost calculator turns the square footage into a material-and-labour total.

Worked Example

Measure a rectangular living room 12 feet long and 15 feet wide. Its area is 12 × 15 = 180 square feet, which is 180 × 0.092903 = 16.72 square metres. Flooring it with a 10% waste allowance needs 180 × 1.10 = 198 square feet of material (18.39 square metres) — the extra 18 square feet covers the cuts around the edges and leaves a few spare boards for future repairs. Add a second room, say a 10 ft × 12 ft bedroom at 120 square feet, and the job total becomes 300 square feet, or 330 square feet with the same 10% waste.

Assumptions

Sources: No external rates are used on this page — every figure is calculated from the dimensions you enter, using standard area formulas. 1 square foot = 0.092903 square metres (exact: 0.09290304). Last reviewed: 15 November 2026.

Built and tested by SumKitTool — see how we check our numbers.

How to Use This Calculator

Pick the room's shape, enter its dimensions in feet, and press Add This Room — it joins the list with its own area subtotal. Repeat for every room, then set the waste allowance: 10% is the standard starting point. The headline result is the total area of all rooms, and the table below shows the total in square metres, the waste amount, and the material estimate with waste included. Remove a room with its Remove button if you measured it twice or entered the wrong shape. Results update as you add or remove rooms, so you can watch the total — and the material estimate — respond.

Tips and Practical Advice

Measure twice, at the longest points. Walls are rarely perfectly straight, so measure the length and width at their longest points and round up to the next whole foot — it is cheaper to have a little extra material than to run short mid-job. Measure each room separately rather than guessing from the overall size of the house: hallways, cupboards and bay windows all add area that a single rough measurement misses. If your tape measure reads in feet and inches and you need centimetres — or the other way round — a feet and inches calculator converts between the two.

Round up when you order. Flooring and tiles are sold in whole boxes or packs, so round the material estimate up to the next whole box — and keep the offcuts. A few spare boards or tiles from the same batch are worth far more than the small saving from ordering exactly enough, because a later repair from a different batch will rarely match. Wallpaper works the same way — it is sold by the roll to cover a wall area, and a wallpaper calculator works out how many rolls you need.

Split odd shapes into simple ones. A room with a bay window is a rectangle plus a triangle; a room with an alcove is a rectangle plus a smaller rectangle. Add each piece as its own room in the list and the calculator does the adding — there is no need to work out the geometry by hand.

Frequently Asked Questions

How do I measure an L-shaped room?

Split the L into two rectangles, measure each one, and add the areas. For example, a 10 ft by 12 ft section plus a 6 ft by 8 ft section is 120 plus 48, or 168 square feet. Take care that the two rectangles meet edge to edge and do not overlap, or the corner gets counted twice.

How much waste should I add for flooring?

10% is the standard allowance for a straightforward rectangular room, 5% is enough for a very simple layout, and 15% is safer for diagonal layouts or rooms with many corners. On a 180 sq ft room, 10% waste means ordering 198 sq ft of material.

How do I convert square feet to square metres?

Multiply by 0.092903. A 180 sq ft room is 16.72 square metres, and 198 sq ft of material with waste is 18.39 square metres. The calculator shows both units for every total.

What if my room is not a standard shape?

Split it into rectangles, triangles and circles, add each piece as its own room in the list, and the calculator totals them. A room with a bay window is a rectangle plus a triangle; a room with an alcove is two rectangles.

Last updated: