Price per Square Foot Calculator
Price per square foot is the quickest way to compare homes of different sizes — a $500,000 home can be cheaper than a $450,000 one if it gives you enough more space. This calculator finds the cost per sq ft or sq m, and compares two properties side by side.
Enter a price and an area for one property, or switch to comparison mode to see which of two homes is cheaper per square foot — and by how much.
Result
How It Works
Price per square foot is one division: price ÷ area. The calculator works in square feet as its base — an area entered in square metres is converted first (1 sq m = 10.76391041671 sq ft) — then shows both the price per sq ft and the price per sq m, so you can use whichever unit your market speaks. In comparison mode it does the same division for both properties and reports the cheaper one and the difference per square foot.
The comparison is only as fair as the areas are. Use the living area (interior floor space) for both homes — not the lot size, and not a figure that includes a garage for one home and not the other. Areas from listings are usually the living area, but check: a home measured to the outside walls looks bigger than the same home measured to the inside walls.
Worked Example
Single: $450,000 ÷ 1,800 sq ft = $250.00 per sq ft ($2,690.98 per sq m). Compare: $500,000 ÷ 2,200 sq ft = $227.27 per sq ft — the second home is cheaper by $250.00 − $227.27 = $22.73 per sq ft.
Assumptions
- Area is the living area (interior floor space), not the lot size. Garages, basements and porches may or may not be included in a listing's figure — use the same definition for both homes.
- 1 sq m = 10.76391041671 sq ft, exact to the digits shown. The price per sq m is the price per sq ft multiplied by that factor.
- Prices are the full purchase price, before closing costs and fees. Those costs are real, but they are not part of the price per square foot.
- Price per sq ft is a comparison shortcut, not a valuation. Location, condition, age, lot size and layout matter as much as size — two homes at the same $/sq ft can be very different buys.
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Enter a price and an area, and the result updates live as you type.
- Enter the first property — its price and its living area, in square feet or square metres.
- Switch to comparison mode to add a second property and see which is cheaper per square foot.
- Read the result — the cost per sq ft and per sq m for each property, and the difference between them.
The Reset button restores the worked example ($450,000 for 1,800 sq ft = $250.00 per sq ft).
Tips and Practical Advice
- Compare like with like. Same neighbourhood, similar age and condition — a renovated home and a fixer-upper at the same $/sq ft are not the same deal.
- Check what the area includes. If one listing counts the finished basement and the other doesn't, the $/sq ft comparison is skewed before you start.
- Use it to sanity-check a listing price. If a home's $/sq ft is far above recent sales nearby, ask why — or use it as a negotiating point.
- Pair this with the Mortgage Calculator. A cheaper $/sq ft still has to fit your monthly budget.
Frequently Asked Questions
How do you calculate price per square foot?
Divide the price by the area: $450,000 ÷ 1,800 sq ft = $250 per sq ft. To get the price per square metre, divide the price by the area in square metres instead — or multiply the per-sq-ft figure by 10.7639.
Which is cheaper: $450,000 for 1,800 sq ft or $500,000 for 2,200 sq ft?
The $500,000 home is cheaper per square foot: $500,000 ÷ 2,200 = $227.27 per sq ft, against $450,000 ÷ 1,800 = $250 per sq ft — a difference of $22.73 per sq ft. The dearer home can still be the better buy if its location or condition is better.
What is a good price per square foot?
It depends entirely on location — $250 per sq ft is cheap in San Francisco and expensive in many smaller towns. Compare with similar homes sold recently in the same neighbourhood, not with a national average, and remember price per square foot ignores condition, lot size and location.
How do I convert price per square foot to price per square metre?
Multiply by 10.7639, because 1 square metre is 10.7639 square feet: $250 per sq ft is $250 × 10.7639 = $2,690.98 per sq m. This calculator shows both figures for every property you enter.
Last updated: