331+ free tools. No sign-up. No hidden fees. Explore the toolkit

Surface Area Calculator

Surface area is the total area of the outside of a three-dimensional shape — every face, side and curve added together. It is what you need when you are painting a tank, wrapping a box, cladding a wall or working out how much material covers a solid.

Pick a shape, enter its measurements, and the calculator shows the total surface area plus the lateral surface area where it is meaningful, with the formula it used. All results are in square units of the unit you choose.

Results are in square units of your choice, such as m² or ft².

Total surface area

Save to Pinterest
Note: the hemisphere total includes the flat circular base (3πr²); the curved dome alone is 2πr² and is shown separately. Results are in square units of the unit you entered — if you measure in feet, the answer is in square feet.

How It Works

Every solid has its own surface-area formula, built from the areas of its faces. This calculator applies the standard formula for the shape you pick:

The lateral surface area is the area of the sides only, leaving out the top and bottom (or the base). It is the figure you want when the ends are open or already covered — the label on a tin, for example, covers only the lateral area of the cylinder.

Worked Example

A sphere of radius 5 m has surface area 4π × 5² = 100π ≈ 314.1593 m². A cube of side 4 m has surface area 6 × 4² = 6 × 16 = 96 m², with a lateral area of 4 × 16 = 64 m². A sphere's surface area is exactly four times the area of a circle with the same radius — see the circle calculator.

A cylinder of radius 3 m and height 7 m has total surface area 2π × 3 × (3 + 7) = 60π ≈ 188.4956 m² and lateral area 2π × 3 × 7 = 42π ≈ 131.9469 m². A cone of radius 3 m and height 4 m has slant height √(3² + 4²) = 5 m, so its total surface area is π × 3 × (3 + 5) = 24π ≈ 75.3982 m² and its lateral area is π × 3 × 5 = 15π ≈ 47.1239 m².

Assumptions

Sources: No external data is used on this page — every figure is calculated from the measurements you enter, using the standard surface-area formulas. Last reviewed: 15 November 2026.

Built and tested by SumKitTool — see how we check our numbers.

How to Use This Calculator

Pick your shape from the menu, choose the unit, and enter the measurements shown. The total surface area appears immediately, with the lateral area and the formula in the table below. Switch shapes any time — each shape remembers its own inputs.

For the cone and pyramid you only enter the radius (or base side) and the vertical height; the slant height is worked out for you and shown in the table. For the triangular prism, enter all three sides of the triangular end plus the length of the prism.

Tips and Practical Advice

Surface area grows with the square of the size, so small measurement errors matter more than they look. Doubling every length quadruples the surface area — a tank twice as wide and twice as tall needs four times the paint, not twice.

Frequently Asked Questions

What is the difference between total surface area and lateral surface area?

Total surface area covers every face of a solid, including the top, bottom and base. Lateral surface area covers only the sides, leaving out the ends — for a cylinder it is the curved side (2πrh) without the two circular ends. Use the total when the whole solid is covered, and the lateral when the ends are open or already covered, such as the label on a tin.

How do I find the slant height of a cone or pyramid?

You do not need to — this calculator works it out from the measurements you enter. For a cone the slant height is the square root of (radius² + height²), and for a square pyramid it is the square root of (height² + (base side ÷ 2)²). Both come from Pythagoras' theorem, and the value is shown in the results table.

Does the hemisphere result include the flat base?

Yes — the total surface area of a hemisphere is 3πr², which is the curved dome (2πr²) plus the flat circular base (πr²). If you only need the dome, for example for a domed roof with no floor, use the curved surface area shown separately in the results table.

What units is the answer in?

The answer is in square units of the unit you choose — metres give square metres (m²), feet give square feet (ft²), and so on. All measurements for one calculation must be in the same unit; convert them first if they are mixed.

Last updated: