Circle Calculator
A circle is defined by a single number: its radius, the distance from the centre to the edge. Every measurement of a circle — radius, diameter, circumference and area — is fixed by any one of the others. Give this calculator a single value and it works out the other three, so you never have to rearrange the formulas yourself.
Give the circle calculator any one measurement — radius, diameter, circumference or area — and it works out the other three at once, with the formulas shown, for homework, crafts and workshop maths.
Circle measurements
How It Works
A circle is defined by a single number: its radius, the distance from the centre to the edge. Double the radius and you have the diameter. Multiply the diameter by π (3.14159…) and you have the circumference, the distance around the circle. Square the radius and multiply by π and you have the area, the space inside it. Because every value comes from the radius, knowing any one measurement lets you work backwards to the radius and then forwards to all the rest.
The four formulas this calculator uses are:
- Diameter: d = 2r
- Circumference: C = 2πr = πd
- Area: A = πr² = πd²/4
- Radius from area: r = √(A/π)
- Radius from circumference: r = C/(2π)
Work in whatever unit you like — centimetres, inches, metres, feet — and the answers come back in the same unit. Just remember the area is in square units: a radius of 5 cm gives an area of 78.5398 cm², not 78.5398 cm.
Worked Example
A circle has a radius of 5. Its diameter is 2 × 5 = 10. Its circumference is 2 × π × 5 = 31.4159. Its area is π × 5² = π × 25 = 78.5398. Going the other way, a circle with an area of 314.1593 has a radius of √(314.1593/π) = 10, a diameter of 20 and a circumference of 62.8319.
Assumptions
- One input determines everything. The calculator assumes the shape is a perfect circle, so a single measurement fixes all four values.
- Positive values only. A radius, diameter, circumference or area of zero or less is not a circle, so the calculator asks for a positive number instead of showing a result.
- Results are rounded to 4 decimal places for display. The underlying calculation uses the full precision of π.
- Units are up to you. The calculator does not convert units — enter centimetres and the area comes back in square centimetres; enter inches and it comes back in square inches.
Sources: No external data is used on this page — every figure is calculated from the number you enter. Last reviewed: 21 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Choose the measurement you know from the “I know the…” selector, then type its value. The results update live as you type, and the Calculate button recalculates on demand.
- Pick what you know — radius, diameter, circumference or area.
- Enter the value in any unit. Decimals are fine.
- Read all four measurements in the result box — radius, diameter, circumference and area.
The Reset button restores the worked example (radius 5) so you can start over.
Tips and Practical Advice
- Measuring a round table or rug? Measure straight across the widest point — that is the diameter — and enter it here to get the circumference (the edging length) and the area (the floor space it covers).
- Need the area from a circumference? Wrap a tape measure around the object, enter the circumference, and the calculator finds the radius first and the area from it.
- Keep your units consistent. If you measured in inches, the area is in square inches. Divide by 144 to convert square inches to square feet.
- For 3D shapes such as cylinders and spheres, try the Volume Calculator, which also uses the radius of the circular base.
How Area and Circumference Scale With Size
Radius, circumference and area do not grow at the same speed. Circumference is proportional to the radius (C = 2πr), so doubling the radius doubles the circumference. Area is proportional to the square of the radius (A = πr²), so doubling the radius quadruples the area. This is the single most useful fact about circles when you are estimating materials or comparing sizes, and it catches people out: a circle twice as wide is four times as big inside, not twice.
Take a radius of 7. The circumference is 2 × π × 7 = 43.9823 and the area is π × 7² = 153.9380. Double the radius to 14 and the circumference doubles to 87.9646 — but the area jumps to π × 14² = 615.7522, four times the original area. Triple the radius and the pattern continues: the circumference triples while the area grows ninefold, because 3² = 9. In general, scaling the radius by a factor of k scales the circumference by k and the area by k².
This matters whenever you pay for area but measure a length, or the other way round. Suppose you are laying turf on a circular lawn with a diameter of 6 metres. The radius is 3, so the area is π × 3² = 28.2743 m² — that is how much turf to order — and the circumference is 2 × π × 3 = 18.8496 m, the length of edging around it. If you widened the lawn to a diameter of 12 metres, the edging would only double to 37.6991 m, but the turf would quadruple to 113.0973 m². Budgeting on the diameter alone would leave you badly short.
The same scaling explains why a large pizza is usually better value than a small one: doubling the diameter quadruples the area, so a 14-inch pizza has four times the area of a 7-inch one, not twice. And it works in reverse — halving the radius cuts the area to a quarter, which is why shrinking a circle by a little saves a lot of material. Whenever a circle changes size, check both numbers with the calculator above: the circumference tells you about the edge, and the area tells you about what is inside.
Frequently Asked Questions
How do I find the area of a circle from the diameter?
Halve the diameter to get the radius, then use A = πr². A circle with a diameter of 10 has a radius of 5, so its area is π × 5² = 78.5398. You can also use A = πd²/4, which gives the same answer in one step.
What is the difference between circumference and area?
Circumference is the distance around the circle — a length, measured in units such as centimetres. Area is the space inside the circle — measured in square units, such as square centimetres. For a radius of 5, the circumference is 31.4159 units and the area is 78.5398 square units.
Can I find the radius from the area?
Yes — rearrange A = πr² to r = √(A/π). A circle with an area of 314.1593 has a radius of √(314.1593/π) = 10. Choose “Area” in the “I know the” selector above and this calculator does it for you.
What value of π does this calculator use?
It uses the full double-precision value of π (3.141592653589793), the same value built into every programming language and scientific calculator. Results are shown rounded to 4 decimal places, which is more precision than almost any real-world job needs.
What happens to the area if I double the radius?
It quadruples. Area depends on the square of the radius (A = πr²), so doubling the radius multiplies the area by 2² = 4. A radius of 7 gives an area of 153.9380; a radius of 14 gives 615.7522. The circumference only doubles, from 43.9823 to 87.9646, because it depends on the radius itself (C = 2πr).
How do I find the area of a circle from the circumference?
Divide the circumference by 2π to get the radius, then use A = πr² — or do it in one step with A = C²/(4π). For a circumference of 31.4159, that gives 31.4159²/(4π) = 78.5397, matching the radius-5 circle's area of 78.5398 to within rounding. Choose “Circumference” in the “I know the” selector above and the calculator does it for you.
Last updated: