Area Calculator
Find the area of eight shapes — rectangle, triangle, circle, trapezoid, parallelogram, ellipse, regular polygon and sector — with the perimeter alongside wherever it can be worked out. Pick a shape, enter its measurements, and the answer appears instantly.
Area is the amount of surface a shape covers, measured in square units. Keep every measurement in the same unit for one calculation. Pick your unit from the menu, and the answer comes back in square units of your choice, such as ft² or m².
Area
How It Works
Area is the amount of surface a shape covers, measured in square units. Each shape has its own formula, and this calculator applies the standard one for the shape you pick:
- Rectangle: area = length × width; perimeter = 2 × (length + width).
- Triangle: area = ½ × base × height, where the height is measured perpendicular to the base; perimeter = the three sides added together.
- Circle: area = πr²; circumference = 2πr.
- Trapezoid: area = ½ × (base₁ + base₂) × height, where the bases are the two parallel sides.
- Parallelogram: area = base × height, where the height is perpendicular to the base — not the slanted side.
- Ellipse: area = πab, where a and b are the semi-major and semi-minor axes (half the long and short diameters).
- Regular polygon: area = (n × s²) / (4 × tan(180°/n)), where n is the number of sides and s is the side length; perimeter = n × s.
- Sector: area = (θ/360°) × πr², where θ is the central angle; the arc length is (θ/360°) × 2πr and the perimeter is the arc plus two radii.
The perimeter is shown wherever it can be worked out from what you entered. A triangle's perimeter needs all three sides, a trapezoid's needs both legs, and a parallelogram's needs the slanted side — so those have optional boxes. Leave them blank and you still get the area; fill them in and the perimeter appears. Area is also the first step in costing a job — for floors, the area plus a waste allowance gives the hardwood flooring cost once you know the price per square foot.
Worked Example
A rectangle 5 m long and 4 m wide has area 5 × 4 = 20 m² and perimeter 2 × (5 + 4) = 18 m. A circle of radius 3 m has area π × 3² = 9π ≈ 28.2743 m² and circumference 2π × 3 ≈ 18.8496 m.
A trapezoid with parallel sides 6 m and 10 m and height 4 m has area ½ × (6 + 10) × 4 = ½ × 16 × 4 = 32 m². A regular hexagon (6 sides) with side length 2 m has area (6 × 2²) / (4 × tan 30°) = 24 / (4 × 0.5774) ≈ 10.3923 m² and perimeter 6 × 2 = 12 m. A sector of radius 4 m with a 90° angle is a quarter of a circle: area = ¼ × π × 16 = 4π ≈ 12.5664 m², arc length = ¼ × 2π × 4 = 2π ≈ 6.2832 m, perimeter = 6.2832 + 8 = 14.2832 m.
Assumptions
- All measurements must use the same unit. If your length is in feet and your width in inches, convert one first — the calculator does not mix units.
- Heights are perpendicular. For triangles, trapezoids and parallelograms the height is the straight-line distance at right angles to the base, not a slanted edge.
- The polygon must be regular — all sides equal and all angles equal. An irregular polygon needs to be split into triangles first.
- Ellipse perimeter is approximate (Ramanujan's formula); every other figure on this page is exact to the precision shown.
- Lengths must be positive. Zero or negative measurements are rejected with a message rather than producing a meaningless area.
Sources: No external data is used on this page — every figure is calculated from the measurements you enter. Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Pick your shape from the menu, choose the unit, and enter the measurements shown. The area appears immediately, with the perimeter (or circumference, or arc length) in the table below. Switch shapes any time — each shape remembers its own inputs.
Measuring a room for flooring or paint? Use the rectangle shape for a rectangular room, or the circle shape for a round rug or table. For an L-shaped room, split it into two rectangles and add the areas — the square footage calculator handles multi-room totals in one place.
Tips and Practical Advice
Small measurement mistakes become big area mistakes, because lengths are multiplied.
- Measure twice, at the widest points. Walls are rarely perfectly straight — measure the length at both ends and use the larger figure when buying materials.
- Add waste for materials. Flooring, tile and wallpaper need 5–10% extra for cuts and offcuts on top of the exact area.
- Don't confuse diameter and radius. The circle and sector shapes ask for the radius — half the width across. If you measured across the whole circle, halve it first.
- Check the unit on the answer. An area in ft² is not the same as an area in m² — 1 m² is about 10.7639 ft², so a room that is 20 m² is about 215 ft².
Frequently Asked Questions
Which shapes does this area calculator cover?
Eight shapes: rectangle, triangle, circle, trapezoid, parallelogram, ellipse, regular polygon and sector (a slice of a circle). Pick a shape from the menu and the calculator shows only the measurements that shape needs — for example, just a radius for a circle, or the two bases and height for a trapezoid.
How do I get the perimeter as well as the area?
The perimeter is shown automatically wherever it can be worked out from the measurements you entered. For a triangle and a trapezoid, the perimeter needs the side lengths too, so optional boxes are provided — fill them in and the perimeter appears; leave them blank and you still get the area.
What units can I use?
Pick any unit from the menu — millimetres, centimetres, metres, kilometres, inches, feet, yards or miles — and the area is shown in square units of your choice, such as ft² or m². All measurements for one calculation must be in the same unit; convert them first if they are mixed.
How is the area of a regular polygon calculated?
With the formula area = (n × s²) / (4 × tan(180°/n)), where n is the number of sides and s is the side length. For a regular hexagon (n = 6) with side 2, that gives 6 × 4 / (4 × tan 30°) = 10.3923 square units. The polygon must be regular — all sides and all angles equal.
Last updated: