Roofing Calculator
Re-roofing or budgeting a new roof? Enter the footprint and pitch to find out how many squares and shingle bundles you need — plus underlayment and ridge caps.
Shingles You Need
How It Works
A sloped roof has more surface than its footprint, so the first step is the slope factor: √(1 + (pitch ÷ 12)²). A 6:12 pitch gives a factor of 1.118, meaning the roof surface is about 12% bigger than the footprint. Multiplying the footprint area by the slope factor gives the roof area, and dividing by 100 gives roofing squares — one square is 100 square feet of roof. Bundles are squares times the bundles per square for your shingle type, rounded up, with the waste allowance applied on top. Felt underlayment is the roof area (with waste) divided by 400 square feet per roll, rounded up, and ridge cap bundles are the ridge length divided by 35 linear feet per bundle, rounded up.
Worked Example
A 30 ft × 50 ft footprint with a 6:12 pitch: the footprint is 1,500 sq ft and the slope factor is √(1 + 0.5²) = 1.118, so the roof area is 1,500 × 1.118 = 1,677 sq ft, or 16.8 squares. Architectural shingles at 3 bundles per square need 16.8 × 3 = 50.3, so 51 bundles before waste; with a 10% waste allowance that becomes 56 bundles. Felt underlayment: 1,677 × 1.10 ÷ 400 = 4.61, so 5 rolls. A 50 ft ridge needs 50 ÷ 35 = 1.43, so 2 ridge cap bundles.
Assumptions
- The footprint is a simple rectangle — dormers, valleys and overhangs are not measured separately; use a higher waste allowance for a complex roof.
- Bundles per square: 3 for standard 3-tab and architectural shingles, 4 for designer shingles. Coverage varies by manufacturer and line — verify it on your packaging.
- One felt underlayment roll covers 400 sq ft; one ridge cap bundle covers 35 linear feet.
- The waste allowance defaults to 10% and applies to bundles and felt, but not to ridge caps.
Architectural shingles (3 bundles per square, 10% waste) for a 30 ft × 50 ft footprint at different pitches:
| Pitch | Slope factor | Roof area (sq ft) | Bundles |
|---|---|---|---|
| 4:12 | 1.054 | 1,581 | 53 |
| 6:12 | 1.118 | 1,677 | 56 |
| 8:12 | 1.202 | 1,803 | 60 |
How to Use This Calculator
Enter the length and width of the roof footprint in feet, pick the pitch, shingle type and waste allowance, and add the ridge length if you want ridge cap bundles. Results update live. To measure pitch, hold a level horizontal from the roof surface, measure 12 inches along it, then measure straight down to the roof — that drop in inches is the pitch.
Tips and Practical Advice
At pitches from 2:12 to 4:12, IRC R905.2.2 requires double underlayment — the calculator flags this when your pitch falls in that range. Below 2:12, asphalt shingles are not suitable at all and a low-slope membrane is needed instead. Order a few spare bundles in the same batch: shingle colour varies between production runs, and a later repair with a different batch can show. And remember that roofing is skilled, dangerous work at height — most homeowners should hire a licensed roofer.
Sources: Slope-factor and squares maths is standard roofing practice; the double-underlayment rule is IRC R905.2.2. Bundle coverage and roll sizes are typical figures — verify them on your packaging. Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
Frequently Asked Questions
How many bundles of shingles do I need?
Divide the roof area by 100 to get squares, multiply by the bundles per square for your shingle type (3 for standard and architectural, 4 for designer), then add a waste allowance and round up. A 30 ft × 50 ft roof at 6:12 pitch is 16.8 squares, so 51 architectural bundles before waste and 56 with a 10% allowance.
What is a roofing square?
A roofing square is 100 square feet of roof area. It is the unit roofers use to price materials and labour: a 1,677 sq ft roof is 16.8 squares. Bundles, underlayment and ridge caps are all worked out from the square count.
How does roof pitch change the shingle count?
A steeper roof has more surface for the same footprint. The slope factor is √(1 + (pitch ÷ 12)²): 1.000 for a flat roof, 1.118 at 6:12 and 1.414 at 12:12. A 6:12 pitch needs about 12% more shingles than the flat footprint area suggests.
Do I need extra underlayment on a low-slope roof?
Yes — at pitches from 2:12 to 4:12, IRC R905.2.2 requires double underlayment, because water drains more slowly and is more likely to get under the shingles. Below 2:12, asphalt shingles are not suitable and a low-slope membrane should be used instead.
Last updated: