Density Calculator
Density ties mass and volume together with one formula — ρ = m ÷ V — so if you know any two of density, mass and volume, you can find the third. This calculator solves for whichever one is missing, in metric and imperial units, with presets for 18 common materials.
Choose what to solve for — density, mass or volume — enter the other two values, and get the answer in your chosen unit plus every equivalent unit and the specific gravity.
Result
How It Works
Everything here comes from one formula: density = mass ÷ volume (ρ = m ÷ V). Rearrange it and you get the other two forms: mass = density × volume and volume = mass ÷ density. The calculator converts your inputs to a common base — kilograms, cubic metres and kg/m³ — solves the formula, then converts the answer back into the unit you asked for, with every equivalent unit shown in the table.
The table also shows specific gravity — the density divided by the density of water (1,000 kg/m³). It has no unit: steel at 7,850 kg/m³ has a specific gravity of 7.85, and ice at 917 kg/m³ has 0.917, which is why ice floats and steel sinks. The material preset fills in a typical density for 18 common materials; pick “Custom density” to enter your own figure.
Worked Example
Water: 2 litres of water (density 1,000 kg/m³) weighs 1,000 × 0.002 = 2 kg. Steel: 0.5 m³ of steel (7,850 kg/m³) weighs 7,850 × 0.5 = 3,925 kg. Density: 500 g in 250 cm³ is 500 ÷ 250 = 2 g/cm³ (2,000 kg/m³), with a specific gravity of 2.
Assumptions
- Values are typical at around 20°C. Density changes with temperature, and alloys, wood and concrete vary with composition and moisture. Use the preset as a starting point and a measured density when accuracy matters.
- Specific gravity uses water at 4°C (1,000 kg/m³) as the reference. That is the standard definition, and it is why water itself has a specific gravity of exactly 1.
- All three quantities must be greater than zero. A zero mass or volume has no density to calculate, and a zero density cannot give a mass or volume — those cases show a clear message instead of a meaningless zero.
- Conversions use exact factors. 1 lb = 0.45359237 kg, 1 US gallon = 3.785411784 litres, 1 ft³ = 0.028316846592 m³ and 1 lb/ft³ = 16.01846337 kg/m³, so converting between units never changes the underlying answer.
Common Material Densities
Typical densities at around 20°C. Air is listed at 20°C and water at 4°C, where it is densest.
| Material | kg/m³ | g/cm³ | lb/ft³ |
|---|---|---|---|
| Air (20°C) | 1.204 | 0.001 | 0.08 |
| Ice | 917 | 0.917 | 57.25 |
| Water (4°C) | 1,000 | 1.000 | 62.43 |
| Seawater | 1,027 | 1.027 | 64.11 |
| Ethanol | 789 | 0.789 | 49.26 |
| Olive oil | 911 | 0.911 | 56.87 |
| Oak wood (dry) | 750 | 0.750 | 46.82 |
| Pine wood (dry) | 500 | 0.500 | 31.21 |
| Concrete | 2,400 | 2.400 | 149.83 |
| Glass | 2,500 | 2.500 | 156.07 |
| Aluminium | 2,700 | 2.700 | 168.56 |
| Steel | 7,850 | 7.850 | 490.06 |
| Iron | 7,874 | 7.874 | 491.56 |
| Copper | 8,960 | 8.960 | 559.35 |
| Lead | 11,340 | 11.340 | 707.93 |
| Mercury | 13,534 | 13.534 | 844.90 |
| Silver | 10,490 | 10.490 | 654.87 |
| Gold | 19,320 | 19.320 | 1206.11 |
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Pick what to solve for, enter the other two values, and the result updates live as you type.
- Choose what to solve for — density, mass or volume. Only the inputs you need are shown.
- Enter your two known values in any units — or pick a material from the preset list to fill in its typical density.
- Read the answer in your chosen unit, with all equivalent units and the specific gravity in the table.
The Reset button restores the worked example (2 litres of water = 2 kg).
Tips and Practical Advice
- Check your units before you trust the answer. The classic mistake is mixing grams with kilograms — 500 g is 0.5 kg, and a factor of 1,000 either way is easy to miss.
- Use specific gravity for a quick sanity check. Anything below 1 floats on water (ice, wood, oil); anything above 1 sinks (steel, glass, concrete).
- Weigh, don't guess, for real materials. Timber varies with species and moisture, concrete with the mix — the preset is a typical value, not a measurement of your batch.
- For a volume of concrete or gravel, use the Concrete Calculator or Gravel Calculator. They work in the units builders actually order in.
Frequently Asked Questions
How do you calculate density?
Divide mass by volume: density = mass ÷ volume. For example, 500 g in 250 cm³ is 500 ÷ 250 = 2 g/cm³. Keep the units consistent — grams with cubic centimetres give g/cm³, kilograms with cubic metres give kg/m³.
What is the density of water?
1,000 kg/m³ (1 g/cm³) at 4°C, where water is densest. That is why specific gravity uses water as the reference: a material with a specific gravity of 2 is twice as dense as water. Seawater is denser, about 1,027 kg/m³, because of its dissolved salt.
What is specific gravity?
Specific gravity is a material's density divided by the density of water (1,000 kg/m³). It has no unit. Steel, at 7,850 kg/m³, has a specific gravity of 7.85 — it is 7.85 times as dense as water — while ice, at 917 kg/m³, is 0.917, which is why ice floats.
How heavy is a cubic metre of concrete?
About 2,400 kg (2.4 tonnes). Concrete's density is typically 2,400 kg/m³, so mass = 2,400 × volume: half a cubic metre weighs 1,200 kg. Real concrete varies with the mix and moisture, so treat 2,400 kg/m³ as a typical value, not an exact one.
Last updated: