Significant Figures Calculator: Count & Round
Significant figures are the digits in a number that carry real meaning about its precision. In 0.00450 the digits 4, 5 and 0 are significant — the leading zeros only place the decimal point — while in 1200 only the 1 and 2 are significant, because trailing zeros without a decimal point are just placeholders.
This calculator counts significant figures, rounds any number to the significant figures you choose, and does addition, subtraction, multiplication and division with the correct rules — fewest decimal places for + and −, fewest significant figures for × and ÷. For rounding to decimal places or the nearest multiple instead, use the rounding calculator.
Solution
How It Works
Significant figures are the digits in a number that carry real meaning about its precision. They tell you how much of the number was actually measured, as opposed to how much is just place-holding. The rules are simple once you know them, and this calculator follows the standard conventions used in science and engineering.
Leading zeros are never significant. In 0.00450 the zeros before the 4 only place the decimal point — they say the number is small, not that it was measured precisely. Trailing zeros count only when the number has a decimal point. 1200 has 2 significant figures (the 1 and the 2), because without a decimal point the zeros are placeholders. But 1200. has 4 significant figures, because the decimal point shows the zeros were measured. And 0.00450 has 3 significant figures — 4, 5 and the final 0, which is significant because it comes after the decimal point. Zeros between non-zero digits are always significant: 101 has 3, and 1002 has 4.
Rounding to N significant figures means keeping the first N significant digits and dropping the rest, rounding the last kept digit up if the next digit is 5 or more. 1234.5678 to 3 significant figures is 1230: keep 1, 2, 3, and the next digit is 4, so round down. A trailing 5 rounds away from zero, so 8.55 to 2 significant figures is 8.6.
Arithmetic has two different rules. For addition and subtraction, the answer keeps the fewest decimal places of the numbers involved: 12.3 + 1.45 = 13.75, but 12.3 has only 1 decimal place, so the answer is 13.8. For multiplication and division, the answer keeps the fewest significant figures: 2.5 × 3.42 = 8.55, but 2.5 has only 2 significant figures, so the answer is 8.6. The idea is the same in both cases — the roughest measurement limits the precision of the result — but the rule is different, and mixing them up is the most common mistake.
Worked Example
Counting: 0.00450 has 3 significant figures — the digits 4, 5 and 0. The leading zeros are never significant, and the trailing 0 is significant because the number has a decimal point. By contrast 1200 has 2 significant figures, while 1200. has 4.
Rounding: 1234.5678 to 3 significant figures is 1230. Keep 1, 2 and 3; the next digit is 4, which is less than 5, so round down and fill the rest with zeros.
Addition: 12.3 + 1.45 = 13.75 unrounded. The fewest decimal places is 1 (from 12.3), so the answer is 13.8.
Multiplication: 2.5 × 3.42 = 8.55 unrounded. The fewest significant figures is 2 (from 2.5), so the answer is 8.6.
Assumptions
- Standard conventions. Leading zeros are never significant; trailing zeros without a decimal point are not significant (1200 → 2 sf); trailing zeros with a decimal point are significant (1200. → 4 sf; 0.00450 → 3 sf); zeros between non-zero digits are always significant.
- Halves round away from zero. A trailing 5 rounds the last kept digit up in magnitude: 8.55 to 2 sf is 8.6, and −8.55 to 2 sf is −8.6. This is the "round half up" rule taught in schools, not banker's rounding.
- Plain numbers only. Enter numbers as ordinary decimals — no exponents such as 1.2e3. Scientific notation has its own calculator on this site.
- Limits. Numbers must be within 1,000,000,000,000,000 in size and have at most 15 decimal places; N for rounding is between 1 and 15. These caps keep the arithmetic exact.
- Counting uses the digits you typed. 1200. and 1200 are different inputs with different answers, so the calculator reads your exact typing — including the decimal point — rather than the number's stored value.
Sources: No external data is used on this page — every figure is calculated from the numbers you enter, using the standard significant-figure conventions. Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Pick a mode. In count mode, type a number exactly as written — including any trailing zeros and decimal point — and the calculator tells you how many significant figures it has and which digits they are. In round mode, type a number and choose N, and the headline result is the rounded number. In arithmetic mode, type two numbers and pick an operation: the table shows each input's significant figures and decimal places, the unrounded result, the rule that applies, and the final rounded answer. Results update as you type, and the Reset button restores the worked examples.
Tips and Practical Advice
When a number ends in zeros and has no decimal point, its significant figures are genuinely ambiguous — 1200 could mean 2, 3 or 4 significant figures depending on how it was measured. This calculator follows the standard convention and counts 2. If you mean 4, write 1200. or use scientific notation (1.200 × 10³), which removes the ambiguity entirely.
Never round in the middle of a calculation. Keep full precision through every step and round only the final answer — rounding early lets small errors grow, and two rounded steps can disagree with one unrounded one. To measure how far a result is from the accepted value, use the percent error calculator.
The addition rule and the multiplication rule are different on purpose: decimal places measure absolute precision (how close to the mark), while significant figures measure relative precision (how many digits you trust). Adding a rough number to a precise one leaves you with the rough one's decimal places; multiplying leaves you with the rough one's significant figures.
Frequently Asked Questions
How do you count significant figures?
Count every digit from the first non-zero digit onwards, with two rules: leading zeros are never significant, and trailing zeros count only if the number has a decimal point. So 0.00450 has 3 significant figures (4, 5, 0), 1200 has 2, and 1200. has 4.
How do you round 1234.5678 to 3 significant figures?
Keep the first three significant digits — 1, 2 and 3 — and look at the next digit, 4, to decide. Since 4 is less than 5, round down: 1234.5678 becomes 1230. A trailing 5 rounds away from zero, so 8.55 to 2 significant figures is 8.6.
What are the significant figure rules for addition and subtraction?
The answer keeps the fewest decimal places of the numbers you added or subtracted — not the fewest significant figures. 12.3 + 1.45 = 13.75, but 12.3 has only 1 decimal place, so the answer is 13.8. The roughest measurement limits the precision.
What are the significant figure rules for multiplication and division?
The answer keeps the fewest significant figures of the numbers you multiplied or divided. 2.5 × 3.42 = 8.55, but 2.5 has only 2 significant figures, so the answer is 8.6. Count significant figures here — decimal places do not matter for multiplication and division.
Last updated: