Percent Error Calculator
Percent error measures how far a measurement is from the value it should be — as a percentage of the accepted value, so a 0.2 error on 10 means much more than the same 0.2 on 1,000. This calculator gives percent error, absolute error and signed error.
Enter your measured value and the accepted value to see the percent error, the absolute error and whether you came in high or low.
Result
How It Works
Percent error compares your measurement with the value it should be, as a percentage of that accepted value: percent error = |measured − accepted| ÷ |accepted| × 100. The absolute values make the answer always positive — it measures the size of the mistake, not its direction. Very small or very large measurements are often written in scientific notation.
Two companion figures complete the picture. The absolute error is the raw difference in the original units (|measured − accepted|), and the signed error keeps the sign (measured − accepted): positive when you measured high, negative when you measured low. The signed percent error is the same idea as a percentage.
Worked Example
10.2 measured vs 10.0 accepted: absolute error 0.2, percent error |0.2| ÷ 10 × 100 = 2.00% (signed +2.00% — the measurement was high). 9.8 vs 10.0: the same 2.00% percent error, but a signed error of −0.2 and signed percent error of −2.00% — the measurement was low. 25.4 vs 25.0: absolute error 0.4, percent error 1.60%. Equal values always give 0%.
Assumptions
- Percent error is always positive. Absolute values remove the sign, so 9.8 and 10.2 are equally wrong against 10.0. Use the signed error when the direction matters.
- The accepted value cannot be zero. Percent error divides by the accepted value, so a zero accepted value makes it undefined — the calculator shows a clear message instead.
- Negative values are allowed. Temperatures and other signed quantities work fine: the formula uses the absolute value of the accepted value, so the percentage stays meaningful.
- Percentages are rounded to two decimals. The headline percent error shows two decimal places; the underlying value is not rounded before the table figures are computed.
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Enter your two values and the result updates live as you type.
- Enter your measured value — the number you got from your experiment or instrument.
- Enter the accepted value — the true, theoretical or expected value.
- Read the answer — percent error, absolute error, signed error and signed percent error.
The Reset button restores the worked example (10.2 measured vs 10.0 accepted = 2.00%).
Tips and Practical Advice
- Use percent error to compare experiments. An absolute error of 0.2 is tiny on 1,000 but large on 10 — the percentage is what lets you compare fairly.
- Watch the sign for bias. If your signed errors are always positive, your method over-reads — a systematic error you can correct. Random signs point to ordinary measurement noise.
- Do not chase 0.00%. A perfect-looking result usually means the accepted value was rounded, or the experiment was designed around the answer. Small honest errors beat suspicious perfection.
- Report the right precision. If your instrument reads to 0.1, quoting percent error to four decimals implies accuracy you do not have — two decimals is plenty.
Frequently Asked Questions
How do you calculate percent error?
Subtract the accepted value from your measured value, divide by the accepted value and multiply by 100, using absolute values: percent error = |measured − accepted| ÷ |accepted| × 100. A measurement of 10.2 against an accepted value of 10.0 gives |0.2| ÷ 10 × 100 = 2.00%.
What is the difference between absolute error and percent error?
Absolute error is the size of the mistake in the original units — 10.2 versus 10.0 is an absolute error of 0.2. Percent error puts that mistake in context as a share of the accepted value: 0.2 out of 10.0 is 2.00%. The same 0.2 error on a value of 1,000 would be only 0.02%.
What does a negative percent error mean?
Strictly, percent error is always positive because it uses absolute values — 9.8 versus 10.0 is 2.00%, the same as 10.2 versus 10.0. The signed error keeps the direction: 9.8 − 10.0 = −0.2, a signed percent error of −2.00%, which tells you the measurement came in low.
What is a good percent error?
It depends on the experiment: under 1% is excellent for careful lab work, 1–5% is usually acceptable for school experiments, and over 10% suggests a systematic problem worth investigating. Always compare against the precision of your instruments — a result cannot be more accurate than the tool that measured it.
Last updated: