Speed Calculator
Speed, distance and time are tied together by one formula — d = s × t — so if you know any two, you can find the third. This calculator solves for whichever one is missing, in mph, km/h or m/s, and shows your running pace too.
Speed is how fast something moves: distance divided by time. Pick the value to find — speed, distance or time — enter the other two, and the answer comes back in your chosen unit, with every equivalent unit alongside.
Result
How It Works
Everything here comes from one formula: distance = speed × time. Rearrange it and you get the other two forms: speed = distance ÷ time and time = distance ÷ speed. The calculator converts your inputs to a common base — kilometres and hours — solves the formula, then converts the answer back into the unit you asked for, with every equivalent unit shown in the table.
The conversion factors are exact by definition: 1 mile = 1.609344 km, 1 m/s = 3.6 km/h, and 1 mph = 1.609344 km/h. When solving for speed, the calculator also shows your pace — minutes per mile and minutes per kilometre — which is just the reciprocal of speed: at 6 mph your pace is 60 ÷ 6 = 10 minutes per mile.
Worked Example
Distance: 60 mph × 2.5 hours = 150 miles (241.4 km). Speed: 100 km in 1.5 hours = 66.67 km/h = 41.42 mph = 18.52 m/s, a pace of 1:27 per mile and 0:54 per km. Time: a 26.2-mile marathon at 8 mph = 26.2 ÷ 8 = 3.275 hours = 3 h 16 min 30 s (196.5 minutes).
Assumptions
- Constant speed. The formula assumes you travel at one steady speed for the whole trip. Real journeys with stops, traffic or hills take longer than the calculation says.
- Time is rounded to the nearest second. The headline time is always shown as hours, minutes and seconds — never a bare decimal — with the exact total minutes and hours in the table.
- Zero has no answer for division. Speed needs a time greater than zero (dividing by zero is undefined), and time needs a speed greater than zero — at zero speed you never arrive. Both cases show a clear message instead of an error value.
- Pace assumes a steady pace. The minutes-per-mile and minutes-per-km figures are the average pace for the whole distance at the calculated speed.
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Pick what to solve for, enter the other two values, and the result updates live as you type.
- Choose what to solve for — distance, speed or time. Only the inputs you need are shown.
- Enter your two known values in any units — time can be hours, minutes and seconds, or decimal hours alone (2.5 hours = 2 h 30 min).
- Read the answer in your chosen unit, with all equivalent units — and pace, when solving for speed — in the table.
The Reset button restores the worked example (60 mph × 2.5 hours = 150 miles).
Tips and Practical Advice
- Check your units before you trust the answer. The classic mistake is mixing miles with kilometres — 100 km in 1.5 hours is 66.67 km/h but only 41.42 mph.
- Use pace for running, speed for driving. A runner's 10:00 per mile and a driver's 6 mph are the same thing; this calculator shows both so you can talk either language.
- Add a buffer for real trips. The formula gives moving time only. For a drive, add stops, traffic and slower stretches — a 150-mile trip at 60 mph takes 2.5 hours of driving, rarely 2.5 hours door to door.
- For a one-off unit change, use the Speed Converter. This calculator solves d = s × t; the converter just changes mph to km/h or m/s.
Frequently Asked Questions
How do you calculate speed from distance and time?
Divide distance by time: speed = distance ÷ time. For example, 100 km in 1.5 hours is 100 ÷ 1.5 = 66.67 km/h. Keep the units consistent — kilometres with hours give km/h, miles with hours give mph.
How long does a marathon take at 8 mph?
3 hours 16 minutes 30 seconds. A marathon is 26.2 miles, so time = 26.2 ÷ 8 = 3.275 hours, which is 3 hours, 16 minutes and 30 seconds (196.5 minutes).
What is pace, and how is it different from speed?
Pace is time per distance — minutes per mile or per kilometre — while speed is distance per time. They are reciprocals: at 6 mph your pace is 10 minutes per mile (60 ÷ 6). Runners talk in pace; drivers talk in speed.
How do I convert mph to km/h?
Multiply by 1.609344: 60 mph × 1.609344 = 96.5606 km/h. This calculator shows every speed answer in mph, km/h and m/s, so you never need to convert by hand — or use the Speed Converter for a one-off conversion.
Last updated: