Normal Distribution Calculator
The normal distribution — the bell curve — describes everything from test scores to heights. This calculator finds the probability below, above or between any values for any mean and standard deviation, shows the z-scores, shades the region on the curve, and works backwards too: give it a probability and it finds the value.
Enter the mean and standard deviation, pick what to find, and get the probability, z-scores and a shaded bell curve instantly.
Result
How It Works
A normal distribution is fully described by its mean (μ) and standard deviation (σ). To find a probability, each value is first converted to a z-score — z = (x − μ) ÷ σ — which says how many standard deviations the value sits from the mean. The probability is then read from the standard normal cumulative distribution function (CDF): P(X < a) is the CDF at a’s z-score, P(X > a) is one minus that, and P(a < X < b) is the difference of the two CDF values. The CDF itself is computed from the error function, which this calculator evaluates via the regularized incomplete gamma function — accurate to about 1e-14, the same approach used by SciPy. The normal distribution describes continuous values; for counted successes in a fixed number of trials, use the binomial distribution.
The inverse mode works backwards: given a cumulative probability p, it finds the x with P(X < x) = p by bisection on the same CDF, running 100 iterations — so the forward and inverse calculations always agree with each other exactly. The shaded bell curve shows the region your probability covers: between the two values, below a value, above a value, or up to the inverse result.
Worked Example
With μ = 100 and σ = 15 (IQ-style scores): P(85 < X < 115) = 0.6827 — the middle 68.27%, one standard deviation either side of the mean. P(X < 115) = 0.8413 and P(X > 130) = 0.0228. A score of 125 has z = (125 − 100) ÷ 15 = 1.6667, and P(X < 125) = 0.9522. The inverse: the value with 97.5% below it is 1.9600 for the standard normal (μ = 0, σ = 1), and 124.6728 for μ = 100, σ = 15 at p = 0.95.
Assumptions
- The data is normally distributed. These probabilities are only right if the quantity you are modelling follows a normal distribution. Skewed data — incomes, waiting times, counts — needs a different distribution.
- σ must be positive. A standard deviation of zero would mean every value is exactly the mean, and the normal distribution is not defined there — the calculator shows a clear message instead.
- Probabilities are exact for the model, not the world. 0.6827 is the exact probability under a perfect normal curve. Real data only approximates the curve, so treat the last decimals as a guide, not a guarantee.
- The inverse needs a probability strictly between 0 and 1. p = 0 would mean x = −∞ and p = 1 would mean x = +∞, so both are rejected with a clear message.
- Education and quick checks. Results are computed from the numbers you enter and are not a substitute for professional statistical advice.
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Enter the mean and standard deviation, pick what to find, and the result updates live as you type.
- Enter the mean (μ) and standard deviation (σ) of your distribution — for the standard normal, use μ = 0 and σ = 1.
- Choose what to find — the probability between two values, below a value, above a value, or the inverse: the x for a given probability.
- Read the answer — the probability (and percentage), the z-scores, and the shaded bell curve showing the region.
The Reset button restores the worked example (μ = 100, σ = 15, between 85 and 115 — P = 0.6827).
Tips and Practical Advice
- Memorize the 68-95-99.7 rule. About 68% of values fall within one standard deviation of the mean, 95% within two, 99.7% within three — a quick sanity check for any answer this calculator gives.
- Use z-scores to compare unlike things. A score of 125 (μ = 100, σ = 15) and a score of 60 (μ = 50, σ = 5) both have z = 2 — they are equally exceptional, even though the raw numbers look nothing alike.
- 1.96 is the number behind the 95% confidence interval. The inverse of 0.975 for the standard normal is 1.9600 — the value that leaves 2.5% in each tail.
- Check normality before you trust the probability. If your data is skewed or has heavy tails, the normal curve is the wrong model — a histogram or a normal-probability plot will tell you quickly.
Frequently Asked Questions
What is a normal distribution?
A normal distribution is the bell-shaped curve defined by two numbers: the mean (μ), the centre of the curve, and the standard deviation (σ), how spread out it is. Many natural measurements — heights, test scores, measurement errors — follow it approximately. The 68-95-99.7 rule says about 68% of values fall within one standard deviation of the mean, 95% within two, and 99.7% within three.
How do you find the probability between two values?
Convert each value to a z-score — z = (x − μ) ÷ σ — then subtract the cumulative probabilities: P(a < X < b) = P(X < b) − P(X < a). For example, with μ = 100 and σ = 15, the values 85 and 115 are z = −1 and z = 1, so P(85 < X < 115) = 0.6827. This calculator does the whole thing for you and shades the region on the bell curve.
What is a z-score?
A z-score says how many standard deviations a value sits from the mean: z = (x − μ) ÷ σ. With μ = 100 and σ = 15, a score of 125 has z = 1.6667 — one and two-thirds standard deviations above average — and 95.22% of values fall below it. Z-scores let you compare values from different distributions on one scale.
How do you find x for a given probability (inverse normal)?
Work the normal distribution backwards: find the x whose cumulative probability is the one you want. For the standard normal (μ = 0, σ = 1), the value with 97.5% below it is 1.9600 — the famous 1.96 behind the 95% confidence interval. With μ = 100 and σ = 15, the 95th percentile is 124.6728. This calculator finds it by bisection on the same CDF it uses for probabilities, so forward and inverse results agree exactly.
Last updated: