Keyword Density Checker
Keyword density is how often a word or phrase appears in a piece of text, as a percentage of all words. Too low and search engines may miss the topic; too high and the text reads like spam — and readers leave.
Paste your text, enter a target keyword, and see its occurrences, density percentage and word count — plus the five most frequent words in the text.
Keyword Density
Most frequent words (excluding common words)
How It Works
Density is simple division: keyword occurrences divided by total words, times 100. A keyword that appears 3 times in 100 words has a density of 3%. Matching is case-insensitive and whole-word — "fox" matches "Fox" and "FOX" but not "foxes", and a phrase like "organic coffee beans" counts only when all three words appear together in that order.
There is no official "correct" density — Google has never published a target, and its guidance is to write for readers, not for a percentage. As a rough guide, most well-written pages land between 0.5% and 2% for their main keyword. Above 3% the text usually starts to feel forced, and stuffing a keyword into every sentence can hurt rankings rather than help them.
Worked Example
"The quick brown fox jumps over the lazy dog. The fox is quick." has 13 words, and "fox" appears twice — a density of 2 ÷ 13 × 100 = 15.38%. That is far above a natural level, because the sample is tiny; on a real 500-word page, the same two mentions would be just 0.4%.
How to Use This Tool
Paste your text, enter a keyword, and click Check Density. The result shows the density, the occurrence count, and the five most frequent words in the text.
- Paste your text. A full article or page works best — short snippets give jumpy percentages.
- Enter a keyword or phrase. One word or several, matched case-insensitively as whole words.
- Read the result. Density, occurrences and word count, plus the top five words (common words like "the" and "and" are left out).
Use the top-words list as a sanity check: if your target keyword is not among the most frequent meaningful words, the page may not be signalling its topic clearly.
Tips and Practical Advice
- Write for readers first. Density is a diagnostic, not a goal. A readability checker scores whether the writing itself is easy to follow. A natural page that answers the question well will rank better than a page tuned to a percentage.
- Use synonyms and related terms. Search engines understand topics, not just exact phrases — "coffee beans", "espresso" and "roast" together signal the topic better than repeating one phrase.
- Check density per section, not just per page. A keyword packed into the first paragraph and absent elsewhere reads worse than one spread evenly through the text.
- Do not chase a magic number. There is no density that guarantees a ranking. If the text reads naturally and covers the topic, the density is probably fine. Once the page ranks, an SEO traffic forecast calculator projects what the traffic could become.
How to Read Your Density Result
Density is simple division: keyword occurrences divided by total words, times 100. Worked example: a 100-word paragraph in which the keyword appears 3 times has a density of 3 ÷ 100 × 100 = 3%. The same 3 mentions in a 300-word page would be 1%, and in a 600-word page 0.5% — the count stays the same, but the density falls as the text grows. That is the first thing to understand about the number: it describes the keyword's share of the text, not its importance.
Short texts make the number jumpy. Two mentions in a 500-word article is 0.4%; the same two mentions in a 50-word product blurb is 4%. Neither figure is wrong — but the 4% says more about the sample size than about the writing. That is why this tool is most useful on full pages and articles: with a few hundred words or more, a single extra mention moves the density by a fraction of a percent instead of doubling it. As a rough guide, most well-written pages land between 0.5% and 2% for their main keyword; above 3% the text usually starts to feel forced. These are common-practice ranges, not Google requirements — Google has never published a target density, and its guidance is to write for readers, not for a percentage.
The number also hides where the keyword sits. A keyword packed into the first paragraph and absent everywhere else produces the same density as one spread evenly through the text, but the two read very differently — and search engines weigh where a term appears, not just how often. Check density per section if a page feels uneven: a keyword that appears in the introduction, a middle heading and the conclusion is doing more work than one that appears three times in the first 100 words and never again.
Finally, remember that density measures one exact phrase, while search engines understand topics. A page about coffee that mentions "espresso", "roast" and "coffee beans" signals its topic clearly even if the exact phrase "organic coffee beans" appears only once. Use the top-words list on this page as a sanity check: if your target keyword and its close relatives appear among the most frequent meaningful words, the page is signalling its topic — and if they do not, the fix is usually to write more about the topic, not to repeat the keyword.
Sources: No external data is used on this page — all processing runs in your browser on the text you enter. Last reviewed: 21 November 2026.
Frequently Asked Questions
What is a good keyword density?
There is no official target — Google has never published one. Most natural pages land between 0.5% and 2% for their main keyword. Above 3% the text usually starts to feel forced.
Does matching count Fox and fox as the same word?
Yes — matching is case-insensitive. 'Fox', 'fox' and 'FOX' all count. Partial matches do not count: 'fox' does not match 'foxes'.
Can I check a phrase, not just one word?
Yes — enter a phrase like 'organic coffee beans' and the tool counts only exact occurrences of the whole phrase, in order, as whole words.
What are the most frequent words for?
A sanity check on what your page is actually about. Common words like 'the' and 'and' are excluded, so the list shows the meaningful words — your target keyword should usually appear near the top.
How do I calculate keyword density by hand?
Divide the number of times the keyword appears by the total number of words, then multiply by 100. A keyword appearing 3 times in 100 words is 3 divided by 100, times 100 — 3%. Count whole-word, case-insensitive matches: Fox counts, foxes does not.
Does keyword density include the title and headings?
This tool counts only the text you paste. If you want the title and headings included, paste them in with the body text — the word count, the occurrence count and the density will all reflect the full text.
Last updated: