IRR Calculator: Internal Rate of Return
The internal rate of return (IRR) is the single number that summarizes an investment's profitability: the annual rate at which the present value of everything the investment returns exactly equals what you put in. A higher IRR means the money works harder — it is the standard way investors compare projects with different sizes and timelines.
Enter your initial investment and the cash flow for each year — up to 10 years — and this calculator solves for the IRR, shows the net present value at that rate as a check, and flags the cases where IRR is misleading or does not exist at all.
Internal Rate of Return
How It Works
IRR is defined by a simple equation: it is the discount rate at which the net present value (NPV) of an investment equals zero. In plain terms, it is the annual rate that makes the value of all future cash flows, discounted back to today, exactly equal to the initial investment. If the investment earns more than that rate, the NPV is positive; less, and it is negative.
There is no closed-form formula for IRR, so this calculator finds it numerically. It scans discount rates from −99.99% upward, looking for the rate where the NPV changes sign, then narrows that bracket down by bisection — repeatedly halving the range — until the rate is pinned down to within a tiny tolerance. The NPV at the reported IRR is shown alongside as a check: it should be $0.00 (within rounding).
Sometimes there is no IRR at all. If every yearly cash flow is negative — the investment never returns anything — the NPV never crosses zero, and no rate satisfies the equation. This calculator says so plainly instead of showing a meaningless number. The same applies when the cash flows never change sign: an IRR only exists when money goes out and then comes back.
There is also a subtle trap: multiple IRRs. When the cash-flow signs change more than once — money out, money in, then money out again (for example, a project with a big cleanup cost at the end) — the NPV equation can have two or more roots, so "the" IRR is not unique. When that happens, this calculator shows one root and warns you clearly that the metric is unreliable for that investment; NPV at your actual required rate of return is the better tool in that case.
Worked Example
You invest $10,000 and receive $3,000 at the end of each year for 5 years — $15,000 in total, a $5,000 profit. The IRR is the rate r that solves −$10,000 + $3,000/(1+r) + $3,000/(1+r)² + $3,000/(1+r)³ + $3,000/(1+r)⁴ + $3,000/(1+r)⁵ = 0. The answer is 15.24%: at a 15.24% discount rate, those five $3,000 payments are worth exactly $10,000 today, and the NPV at that rate is $0.00. Because the cash flows change sign only once (out, then in), this IRR is unique and reliable.
Assumptions
- Cash flows arrive at the end of each year. Year 1's cash flow is discounted by one year, year 2's by two, and so on. The initial investment is at year 0 and is not discounted.
- Reinvestment at the IRR. IRR implicitly assumes interim cash flows are reinvested at the IRR itself. If that rate is unrealistic, the IRR overstates what you will actually earn.
- One root is reported. When cash flows change sign more than once, several IRRs can exist; the calculator reports the first root it finds and warns you that the result is unreliable.
- Search range −99.99% to 1,000,000%. Returns outside that range are reported as no solution — in practice, an IRR that high means the inputs need checking.
- Up to 10 years of cash flows. Longer projects should be grouped into annual totals or split into phases.
Sources: No external rates are used on this page — every figure is calculated from the numbers you enter. The worked example was verified independently (bisection and Newton methods agree at 15.24%). Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Enter the initial investment — the money you put in at the start. Then enter the cash flow for each year: positive when the investment pays you, negative when it costs you that year. Use "+ Add a year" to extend the list (up to 10 years) and "− Remove last year" to shorten it. The result updates as you type.
The headline result is the IRR as an annual percentage. The table below shows the NPV at that rate (a check — it should be $0.00), the total cash received, the net profit, and a verdict: whether the investment beats a typical hurdle, and whether the cash-flow pattern makes the IRR unreliable.
Tips and Practical Advice
Compare IRR against your required rate of return — your cost of capital, or what you could earn elsewhere. An IRR of 15% is attractive if your hurdle is 8%, but not if a competing project offers 20% at similar risk.
Do not rank projects by IRR alone. IRR ignores scale: a 50% return on $100 is $50, while a 15% return on $1,000,000 is $150,000. For mutually exclusive projects, NPV at your required rate is usually the better ranking tool.
Be suspicious of very high IRRs on short projects — they annualize a quick gain and rarely reflect what you can actually reinvest at. And whenever the page warns about multiple sign changes, trust the warning: use NPV instead. These figures are estimates, not investment advice.
Frequently Asked Questions
What does an IRR of 15% mean?
It means the investment earns about 15% a year on the money invested: at a 15% discount rate, the present value of everything the investment returns exactly equals what you put in. Compare it with your required rate of return — if your hurdle is 8%, a 15% IRR clears it comfortably; if a competing project offers 20% at similar risk, it does not.
Why does the calculator say there is no IRR?
An IRR only exists when the cash flows change sign — money goes out and then comes back. If every yearly cash flow is zero or negative, the investment never returns anything, so no discount rate can make the NPV zero. The calculator says so plainly instead of showing a meaningless number. Check that at least one year has a positive cash flow.
Can an investment have more than one IRR?
Yes. When the cash flows change sign more than once — money out, money in, then money out again, such as a project with a large cleanup cost at the end — the NPV equation can have two or more roots, so there is no single IRR. This calculator shows one root and warns you clearly; in that case, judge the investment by NPV at your required rate instead.
IRR vs NPV — which should I use?
Use both. IRR is a rate, so it is easy to compare against a hurdle rate, but it ignores scale and assumes cash flows are reinvested at the IRR itself. NPV is a dollar amount at your actual required rate, so it is better for ranking mutually exclusive projects. When they disagree, NPV at your required rate is usually the more reliable guide.
Last updated: