Half-Life Calculator
Half-life is the time it takes for half of a radioactive sample to decay — after one half-life half remains, after two a quarter, after three an eighth. This calculator finds the amount left after a time, the time to reach a target amount, or the half-life itself.
Pick what to solve for, choose an isotope preset or enter your own half-life, and get the answer in seconds, minutes, hours, days or years.
Result
How It Works
Radioactive decay is exponential: every half-life, half of what remains decays. The three forms of the same law are N = N₀(1/2)^(t/T) for the amount left, t = T × ln(N₀/N) ÷ ln 2 for the time to reach a target, and T = t × ln 2 ÷ ln(N₀/N) for the half-life itself — where N₀ is the starting amount, N is the amount left, t is the elapsed time and T is the half-life.
Counting half-lives is the quickest sanity check: after n half-lives, the fraction left is (1/2)^n — 1/2 after one, 1/4 after two, 1/8 after three. The calculator shows the number of half-lives in every answer so you can check it at a glance.
Worked Example
Remaining amount: 100 g of Cobalt-60 (half-life 5.27 years) after 10.54 years — exactly two half-lives — leaves 100 × (1/2)² = 25 g. Time to reach a target: 100 g of Cobalt-60 decaying to 12.5 g takes 5.27 × ln(8) ÷ ln 2 = 15.81 years (three half-lives). Half-life from measurements: 100 g decaying to 25 g in 10.54 years gives T = 10.54 × ln 2 ÷ ln 4 = 5.27 years. Carbon-14: 1 g after 11,460 years (two half-lives of 5,730 years) leaves 0.25 g.
Assumptions
- One isotope, one half-life. The calculation assumes a single decaying substance with a constant half-life. Mixtures of isotopes decay at different rates and need separate calculations.
- The sample only shrinks. The target amount must be smaller than the starting amount — decay never adds material. A target equal to or larger than the starting amount has no answer.
- All times share one unit. The time unit you pick applies to the half-life, the elapsed time and the answer together, so the numbers stay consistent.
- Exact exponential law. The calculator uses the exact formula with no rounding of the exponent. Very small remaining amounts are shown in scientific notation.
Last reviewed: 15 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Pick what to solve for, enter your values, and the result updates live as you type.
- Choose what to solve for — the remaining amount, the time to reach a target, or the half-life from measurements.
- Pick an isotope preset or enter your own half-life — presets fill in the accepted half-life and its usual time unit.
- Enter the starting amount and the time or target, then read the answer with the number of half-lives elapsed.
The Reset button restores the worked example (100 g of Cobalt-60, half-life 5.27 years, after 10.54 years = 25 g).
Tips and Practical Advice
- Count half-lives first. If the elapsed time is about two half-lives, expect about a quarter to remain — a quick check that catches unit mistakes.
- Match the units. A half-life in days with a time in years gives a wrong answer. This calculator keeps one unit for everything, so the mismatch cannot happen.
- Carbon dating uses the same maths. Archaeologists measure the Carbon-14 left in a sample and solve for time — the same t = T × ln(N₀/N) ÷ ln 2 formula this calculator uses. To evaluate the natural logs in that formula, use the log calculator.
- Nothing ever reaches exactly zero. Exponential decay approaches zero but never gets there — after ten half-lives about 0.1% still remains.
Frequently Asked Questions
What is half-life?
Half-life is the time it takes for half of a sample of a radioactive substance to decay. After one half-life, half remains; after two, a quarter; after three, an eighth. Carbon-14 has a half-life of 5,730 years, so 1 g of Carbon-14 becomes 0.25 g after 11,460 years — two half-lives.
How do you calculate the remaining amount after a given time?
Use N = N₀ × (1/2)^(t/T), where N₀ is the starting amount, t is the elapsed time and T is the half-life. For example, 100 g of Cobalt-60 (half-life 5.27 years) after 10.54 years — exactly two half-lives — leaves 100 × (1/2)² = 25 g.
How long does it take for a sample to decay to a target amount?
Rearrange the formula: t = T × ln(N₀/N) ÷ ln 2. For 100 g of Cobalt-60 to decay to 12.5 g takes 5.27 × ln(8) ÷ ln 2 = 15.81 years — three half-lives, since 100 → 50 → 25 → 12.5.
Can you work out the half-life from measurements?
Yes: if you know the starting amount, the amount left and the time passed, T = t × ln 2 ÷ ln(N₀/N). If 100 g decays to 25 g in 10.54 years, the half-life is 10.54 × ln 2 ÷ ln 4 = 5.27 years — the half-life of Cobalt-60.
Last updated: