Depreciation Calculator: SL, DDB, SYD & MACRS
Depreciation spreads the cost of a business asset — a vehicle, a machine, a computer — across the years it is used, instead of expensing it all at once. The method you choose changes how much you deduct each year: straight-line gives the same deduction every year, while accelerated methods like double-declining balance and MACRS give larger deductions early on.
Enter the asset's cost, its salvage value and its useful life, pick a method, and this calculator builds the full yearly depreciation schedule — depreciation expense and end-of-year book value for every year of the asset's life.
First-Year Depreciation
How It Works
Depreciation is the accounting answer to a simple problem: a $10,000 machine that lasts five years is not really a $10,000 cost in year one and free afterwards — it is a cost spread across the five years it earns money for you. Depreciation schedules do that spreading, and the method you pick decides the shape of the spread.
Straight-line (SL) is the simplest method: the same deduction every year. Subtract the salvage value from the cost, divide by the useful life, and that is the annual depreciation. A $10,000 asset with no salvage value over 5 years depreciates by $2,000 every year. It is easy to explain, easy to audit, and the default choice when an asset loses value steadily.
Double-declining balance (DDB) is an accelerated method: each year you depreciate a fixed percentage — twice the straight-line rate — of the asset's remaining book value. For a 5-year asset the rate is 2 ÷ 5 = 40% a year, so year one takes $4,000 of a $10,000 asset, year two takes 40% of the remaining $6,000 ($2,400), and so on. Because the balance shrinks, the deductions shrink too. This calculator follows standard practice and switches to straight-line in the later years whenever straight-line would give a larger deduction — that is how the asset still reaches its salvage value exactly at the end of its life. The asset is never depreciated below its salvage value.
Sum-of-years-digits (SYD) is another accelerated method, gentler than DDB. Add up the digits of the life (for 5 years: 5 + 4 + 3 + 2 + 1 = 15), then take 5/15 of the depreciable amount in year one, 4/15 in year two, and so on down to 1/15 in the final year. On a $10,000 asset that gives $3,333.33 in year one and $666.67 in year five.
MACRS — the Modified Accelerated Cost Recovery System — is the method the US tax code actually requires for most business property. It uses published IRS percentage tables (Publication 946, Appendix A) under the General Depreciation System with the half-year convention, which treats the asset as placed in service halfway through the first year. That is why a 5-year MACRS schedule has six rows: 20%, 32%, 19.2%, 11.52%, 11.52% and 5.76% of the basis. Unlike the other methods, MACRS ignores salvage value entirely — you depreciate the full basis. Note that bonus depreciation is a separate election that lets you deduct part or all of the cost in year one; it is not computed here, and the schedule below uses only the published MACRS tables.
| Method | Year 1 | Year 2 | Total |
|---|---|---|---|
| Straight-line | $2,000.00 | $2,000.00 | $10,000.00 |
| Double-declining | $4,000.00 | $2,400.00 | $10,000.00 |
| Sum-of-years | $3,333.33 | $2,666.67 | $10,000.00 |
| MACRS 5-year | $2,000.00 | $3,200.00 | $10,000.00 |
Every method depreciates the same total — $10,000 on a $10,000 asset with no salvage value. The only difference is when the deductions land. Accelerated methods push deductions earlier, which lowers taxable income sooner; that timing advantage is the whole reason they exist.
Worked Example
You buy equipment for $10,000 with $0 salvage value and a 5-year useful life. Under straight-line, the depreciable amount is $10,000 − $0 = $10,000, so each year's deduction is $10,000 ÷ 5 = $2,000. Under double-declining balance, year one takes 40% of $10,000 = $4,000, year two takes 40% of the remaining $6,000 = $2,400, and the schedule switches to straight-line in years four and five ($1,080 each) so the asset finishes exactly at $0. Under sum-of-years-digits, year one is 5/15 × $10,000 = $3,333.33.
Under MACRS 5-year, the IRS table gives year one 20% × $10,000 = $2,000.00, year two 32% = $3,200.00, year three $1,920.00, years four and five $1,152.00 each, and a sixth year of 5.76% = $576.00 — the half-year convention's extra year. All six years add up to exactly $10,000.00.
Assumptions
- Salvage value is a floor. For SL, DDB and SYD, the asset is never depreciated below its salvage value, and the salvage value must be less than the cost. MACRS ignores salvage value entirely.
- DDB switches to straight-line when straight-line would give a larger deduction in a remaining year. This is standard practice and is how the schedule reaches the salvage value exactly.
- MACRS uses the GDS half-year convention (IRS Publication 946, Appendix A, Table A-1). The mid-quarter convention and the Alternative Depreciation System (ADS) are not covered.
- Bonus depreciation and Section 179 are not included. Those are separate elections that change the first-year deduction; this calculator shows the plain schedule only.
- Useful life is 1–50 years for SL, DDB and SYD. MACRS uses the fixed IRS property classes (3, 5, 7, 10, 15 or 20 years).
Sources: MACRS percentages from IRS Publication 946, Appendix A, Table A-1 (General Depreciation System, half-year convention). Every column sums to 100%. Last reviewed: 21 November 2026.
Built and tested by SumKitTool — see how we check our numbers.
How to Use This Calculator
Choose a depreciation method first. For straight-line, double-declining balance or sum-of-years-digits, enter the asset's cost, its salvage value and its useful life in years. For MACRS, choose the property class instead — the life and salvage fields are hidden because the IRS table sets the schedule and salvage value does not apply.
The headline result is the first-year depreciation. Below it, the table shows the depreciable basis, the total depreciation over the asset's life and the final book value, followed by the full yearly schedule: the depreciation expense and the end-of-year book value for every year. Switch methods to compare how the same asset's deductions move between years.
Tips and Practical Advice
For tax purposes, the method is usually not your choice — MACRS is required for most US business property placed in service after 1986, and the property class is set by the IRS, not by you. Straight-line, DDB and SYD matter mainly for your own books, for financial reporting, and for assets outside the US tax system.
Accelerated depreciation is a timing benefit, not free money: you deduct the same total either way, but earlier deductions are worth more because of the time value of money and because they cut this year's tax bill. That is why MACRS front-loads the schedule.
Keep the schedule this calculator produces with your records — if you sell the asset, the accumulated depreciation determines your book value and can trigger depreciation recapture tax on the gain. These figures are estimates, not tax advice.
Which Method Should You Use?
The choice depends on why you are depreciating. For a US federal tax return, there is usually no choice at all: MACRS is required for most business property placed in service after 1986. The decisions there are the property class and the convention, not the method — the IRS table sets the schedule, and salvage value does not apply.
For financial statements — book depreciation — the method should match how the asset actually loses value. Straight-line suits assets that wear evenly: buildings, furniture, fixtures. Accelerated methods (double-declining balance, sum-of-years-digits) suit assets that lose value fast early on: computers, vehicles, machinery that becomes outdated quickly. An honest schedule is one where the pattern of deductions follows the pattern of value loss, not one that simply minimises this year’s tax.
Book and tax depreciation can differ — and usually do. A company may use straight-line in its accounts and MACRS on its tax return, and the gap between the two creates deferred tax on the balance sheet. That is a normal accounting item, not an error: it records the fact that the tax deductions and the book deductions arrive on different schedules.
Whatever method you pick, remember the total never changes. Every method depreciates the same depreciable amount over the asset’s life — MACRS the full basis, the others the cost minus salvage value. Only the timing differs, and timing is what changes the tax bill year by year. That is the whole decision: not how much you deduct, but when.
Frequently Asked Questions
What is the difference between straight-line and MACRS depreciation?
Straight-line spreads the cost evenly — the same deduction every year — and stops at the salvage value. MACRS is the method the US tax code requires for most business property: it uses fixed IRS percentage tables, front-loads the deductions, ignores salvage value entirely, and runs one year longer than the class life because of the half-year convention. On a $10,000 5-year asset, straight-line gives $2,000 a year; MACRS gives $2,000 in year one, $3,200 in year two, and $576 in a sixth year.
Does MACRS use salvage value?
No. Under MACRS you depreciate the full basis of the asset — the salvage value is ignored, which is why this calculator hides the salvage field when you select MACRS. Straight-line, double-declining balance and sum-of-years-digits all subtract the salvage value first and never depreciate the asset below it.
Why does double-declining balance switch to straight-line?
Because the declining-balance rate applies to a shrinking book value, the deductions get smaller every year and would never quite reach the salvage value. Switching to straight-line in the later years — whenever it gives a larger deduction — is standard practice and guarantees the asset finishes exactly at its salvage value. On a $10,000 5-year asset the switch happens in year four.
Can I depreciate an asset below its salvage value?
No. For straight-line, double-declining balance and sum-of-years-digits, the salvage value is a floor: total depreciation equals cost minus salvage value, never more. If you enter a salvage value equal to or greater than the cost, this calculator asks you to correct it, because there would be nothing left to depreciate.
Can I use a different method for tax and for my books?
Yes — and most businesses do. US tax returns generally require MACRS, while financial statements usually use straight-line or another method that matches how the asset actually loses value. The difference between the two creates deferred tax on the balance sheet, which is a normal accounting item, not a mistake.
What is bonus depreciation?
Bonus depreciation is a separate tax election that lets a business deduct a large part — in some years all — of an asset’s cost in the first year it is placed in service, instead of spreading it over the MACRS schedule. The percentage allowed has changed over the years, so check the current IRS rules for the year you place the asset in service. It is not computed here; this calculator shows the plain schedule only.
Last updated: